Item no.: T-2500
- Description
The Booster is the most powerful basic trainer and can generate high resistance at low speeds. If you set the handlebar resistance lever to a high position you have to exert a lot of force while advancing slowly, just like when you tackle a steep climb. This makes the Booster highly suitable for power based workouts.
- Magnets 2x8 Permanent ferrite magnets
- Electrical requirements No mains voltage required
- Power indicator None
- Connection indicator (ANT/BT) None
- Firmware upgradable No
- Suitable bikes Race, Tri & MTB , if necessary with axle skewer
- Suitable axles Width of rear fork: Race 130 mm, MTB 135 mm. Adapters for other widths available
- Supplied with Front wheel support , Quick release for road bikes and mountain bikes (5mm)
SPECIFICATIONS
- Max. power (40 km/h) 1050 Watt
- Max. incline n.a.
- Simulation of descent No
- Max. torque 17 Nm
- Max. brake force 50 N
- Flywheel Actual of 1,6 kg
- Mass inertia 9.18 kg (20.2 lbs)
- Calibration n.a.
- Footprint (lxw) 675 × 650 mm (26.6 × 25.6 in)
- Height 410 mm (16.1 in)
- Dimensions when folded 565 × 410 × 245 mm (22.2 × 16.1 × 9.65 in)
- Weight 8.53 kg (18.8 lbs)
- Article number T2500
DATA OUTPUT AND CONTROL
- Wireless communication None
- Control by Handlebar resistance lever with 10 positions
- Output n.a.
- Read out on n.a.
- Accuracy n.a.
Details:
- Type of trainer Basic trainer with magnetic brake
- Magnets 2x8 Permanent ferrite magnets
- Transmission Roller, 30 mm
- Electrical requirements No mains voltage required
- Power indicator None
- Connection indicator (ANT/BT) None
- Firmware upgradable No
- Suitable bikes Race, Tri & MTB , if necessary with axle skewer
- Suitable axles Width of rear fork: Race 130 mm, MTB 135 mm. Adapters for other widths available
- Supplied with Front wheel support , Quick release for road bikes and mountain bikes (5mm)
SPECIFICATIONS
- Max. power (40 km/h) 1050 Watt
- Max. incline n.a.
- Simulation of descent No
- Max. torque 17 Nm
- Max. brake force 50 N
- Flywheel Actual of 1,6 kg
- Mass inertia 9.18 kg (20.2 lbs)
- Calibration n.a.
- Footprint (lxw) 675 × 650 mm (26.6 × 25.6 in)
- Height 410 mm (16.1 in)
- Dimensions when folded 565 × 410 × 245 mm (22.2 × 16.1 × 9.65 in)
- Weight 8.53 kg (18.8 lbs)
- Article number T2500
DATA OUTPUT AND CONTROL
- Wireless communication None
- Control by Handlebar resistance lever with 10 positions
- Output n.a.
- Read out on n.a.
- Accuracy n.a.
Average customer rating:
Number of Customer reviews: 0